Sale!

Cel-Fi GO Home & Building Cellular Coverage Repeater (Stationary) – Telstra, Optus, Vodafone

$1,195.00$1,650.00 inc. GST

A smart and Australian approved cellular signal booster, the Cel-Fi GO Stationary Signal Repeater can amplify an existing cellular signal up to 100 dB in your house or building. In a poor coverage area or dropping calls and connections in your residence or property? This is the only legally approved product that may be used on Australian mobile phone networks to deliver the largest coverage footprint with best in class voice and data performance. This product can be purchased and legally used by the public on your preferred mobile network operator (compatible with your home devices).

Note: These packages are sold as a base kit. Please talk to one of our sales staff for recommendations for your install (brackets, antenna poles/masts, additional service antennas etc.). We can create custom kits for more advanced and demanding solutions.

Kit Includes:
– 1x Cel-fi GO G31/32 Repeater (including AC power supply) [select the repeater type you wish to support]
– 1x Enclosed LPDA Antenna (Donor) w/10.0m terminated low-loss cable, up to 11dBi, wide-band to 2700MHz, LL195/9006, Nm-SMAm
– 1x Omni Directional Ceiling Antenna (Service), 4.6-6.3dBi, wide-band to 5000MHz
– 1x 10.0m Terminated low-loss service cable, LL195/9006, Nm-SMAm

Optional Accessories
Wide-Band-Directional-Panel-(Service)-Antenna---698-3800Mhz
$96.00 inc. GST
Universal Roof Mount with 2.4m Mast
$150.00 inc. GST
Universal Roof Mount with 2.4m Mast
$125.00 inc. GST
Gutter Mount Antenna Pole
$65.00 inc. GST
Hockey-Stick-Pole-Mount
$50.00 inc. GST
Hockey-Stick-Pole-Mount
$65.00 inc. GST
Please note: antenna accessories attract an additional freight charge as it is considered a bulky item and may be required to ship via specialist carrier.

Kit Includes:
1x Cel-fi GO G31 Telstra Unit (including AC power supply)
1x Enclosed LPDA Antenna (Donor) w/10.0m terminated low-loss cable, up to 11dBi, wide-band to 2700MHz, LL195/9006, Nm-SMAm
1x Omni Directional Ceiling Antenna (Service), 4.6-6.3dBi, wide-band to 5000MHz
1x 10.0m Terminated low-loss service cable, LL195/9006, Nm-Nm

$1195 inc. GST

Kit Includes:
1x Cel-fi GO G31 Optus Unit (including AC power supply)
1x Enclosed LPDA Antenna (Donor) w/10.0m terminated low-loss cable, up to 11dBi, wide-band to 2700MHz, LL195/9006, Nm-SMAm
1x Omni Directional Ceiling Antenna (Service), 4.6-6.3dBi, wide-band to 5000MHz
1x 10.0m Terminated low-loss service cable, LL195/9006, Nm-Nm

$1215 inc. GST

Kit Includes:
1x Cel-fi GO G32 Optus OR Vodafone Unit (including AC power supply)
1x Enclosed LPDA Antenna (Donor) w/10.0m terminated low-loss cable, up to 11dBi, wide-band to 2700MHz, LL195/9006, Nm-SMAm
1x Omni Directional Ceiling Antenna (Service), 4.6-6.3dBi, wide-band to 5000MHz
1x 10.0m Terminated low-loss service cable, LL195/9006, Nm-Nm

$1650 inc. GST

Description

This product is ideal for homes, stand-alone buildings/sheds, rural properties or anywhere on your property where you may have weak/limited network strength. Intelliboost signal processing technology can improve 3G / 4G / 4GX Voice and Data with a footprint up to 15,000 ft2 (1,500 m2) of Coverage. How does it work?
  1. Install the “Donor” antenna (select an indoor or outdoor type, included in our package). This is the antenna that will capture the existing cellular signal from the network and can be mounted indoor or outdoors. The indoor and outdoor antennas are different products with an outdoor antenna preferred for best results. Antenna installation may require 3rd party contractor depending on the location.
  2. Install the “Server” antenna. This is the internal antenna that will broadcast the enhanced signal within the area you wish to have coverage. Antenna placement should be tested to determine best location for your requirements.
  3. Mount the Cel-Fi Go unit in proximity to your antenna and connect to a GPO (power outlet).
  4. Connect Donor and Server antennas to the Cel-Fi Go unit.
  5. Power-up the Cel-Fi unit and enjoy your enhanced network coverage*
*Network signal enhancement is not guaranteed and is entirely dependent on an existing signal in the first place. External and exterior objects may cause changes to your coverage. Best in class features:
  • 3G / 4G / 4GX Voice and Data
  • Up to 15,000 ft2 (1,500 m2) of Coverage
  • Multi-Band Support
  • Indoor / Outdoor IP54 Rated
  • Network Safe
  Antenna Options Outdoor Yagi Antenna (preferred installation) Designed to be mounted outdoors, this antenna helps overcome signal loss in challenging terrain. It can improve voice quality and data performance on mobile devices, as well as point-to-point communications in RF control. The bundle includes stationary repeater, power supply, cable and mounting accessories. Requires professional installation. Indoor Antenna Designed for mounting indoors, this repeater panel antenna improves voice call quality and data connection for smartphones and mobile broadband devices. The bundle includes stationary repeater, power supply, 10m cable and mounting accessories. Requires professional installation.

CEL-FI FREQUENTLY ASKED QUESTIONS (FAQ)

Cel-fi is a 3G/4G/LTE cellular signal amplifier that is approved for use on Australian networks.

Select Cel-fi GO & Solo models are legal and approved for use on Australian networks. Find more information from the ACMA here.

Cel-fi Mobile versions are suitable for vehicles, trucks, boats, caravans that are on the move etc. This version allows for the Cel-fi unit to move or switch between towers during transit. Cel-fi Mobile versions: G31 (some models), G32

Cel-fi Stationary versions are suitable for buildings, homes or situations where the Cel-fi repeater and donor antenna will not move. Stationary mode allows for the unit to function with higher gain.

Stationary versions: G31 (some models), G32, G41, Pro, Solo

Cel-fi G31 series are available in mobile and stationary versions. The G31 mobile version will be the most common Cel-fi for a vehicle, truck, caravan.

Cel-fi G32 series may be switched between Optus or Vodafone for support of a singular network once registered. You may change the network registration of the repeater at any time should your requirements change.

Cel-fi G41 series may be switched between Telstra or Optus or Vodafone for support of a singular network once registered. You may change the network registration of the repeater at any time should your requirements change.

No Cel-fi product will support the simultaneous “repeating” of more than one network.

Cel-fi G31 series are locked into specific networks off the shelf.

Cel-fi G32 series may be switched between Optus or Vodafone for support of a singular network once registered. You may change the network registration of the repeater at any time should your requirements change.

Cel-fi G41 series may be switched between Telstra or Optus or Vodafone for support of a singular network once registered. You may change the network registration of the repeater at any time should your requirements change.

 

This is possible, however, it cannot be facilitated with one Cel-fi repeater.

A Cel-fi repeater and dedicated donor antenna will be required for each network that you wish to support.  In some cases, a single donor may be utilised when all suitable carrier signals are located on the same cellular tower. With the addition of the right combining hardware and service antennas – we can design a kit and solution to meet your requirements.

All Cel-fi units are registered and configured via the Cel-fi WAVE app for Andriod and Apple (iOS).

Stationary/Building/Home:

Whilst we highly recommend a professional installation and configuration, many users choose to self-install. The Cel-fi app will display real-time signal settings that can be used to fine tune your installation (for example, the direction/aspect of a donor antenna for a stationary/building can be fine-tuned by interpreting signal values in the app as the direction of the antenna is rotated etc.)

Mobile/Vehicle (on the GO):

We recommend setting your Cel-fi to “Automatic” via the WAVE app. This will let the Cel-fi handle all settings and function automatically.

Alternatively, you may set your Cel-fi to “3G” or “4G” or even specific bands. For example, rural areas may benefit from locking the Cel-fi to 3G only.

Most Cel-fi kits readily available online will feature one or two service antennas. As a rough guide, one service antenna will provide signal to one room (approx 200 square metres). Performance is also entirely dependent on the quality and power of the source (donor) signal that the Cel-fi is repeating.

Larger projects with greater coverage areas and antennas will require design, hardware and balancing considerations. Contact us to talk you through the options available for low-power, off-air repeaters and DAS solutions.

We recommend Cel-fi G41 or Solo for all stationary, home and building solutions as they are multi-band repeaters – providing for increased coverage and channel support over G31 stationary versions. If you only need to repeat one good quality signal such as 700 or 1800 (4G) then you can consider the G31 stationary series.

Sure, we can help you! However, an off-the-shelf kit will not suffice for your requirement. We will be able to design and recommend the appropriate hardware and DAS (distributed antenna system) for your needs including installation and commissioning.

Multiple individual instances of Cel-fi systems will not solve your coverage issues – leading to hand over issues, interference and noise. In some case, the units will not function at all.

As a guide, you should be noting the following variables…

Power (RSRP)

Measured in negative (-) dBm where the closer to zero the value, the stronger the signal. The range is typically -60 (Stronger) to -130 (Very weak to unusable).

Quality (RSRQ)

Measured in negative (-) dB where the closer to zero the value, the stronger the signal. The range is typically -5 (Stronger) to -20 (Very weak to unusable).

Noise (SINR)

Measured in negative dB where a positive number is a better quality signal. The range can vary from -20 to +20 whereby positive values are always better.

 

Omni or Omni-Directional antennas receive signals equally from all directions, providing consistent coverage over a broad area where cellular signals are considered good. The disadvantage is they cover a smaller range and may not be able to pick-up signals from far cellular towers.

 

Directional antennas are recommended over omni, particularly for stationary installations. They are generally more powerful with a higher gain, meaning a narrower beamwidth. Further distance and less noise are key factors as to why directional antennas (or yagi) are preferable for Cel-fi stationary.

Features

Select Network Carrier

, ,

Why CB Radio Wholesalers

  • CB Radio Wholesalers is always striving to offer the best solution to our customers. We take the stress out of your purchase, with our extensive knowledge and resources.
  • We are passionate about keeping your team connected with two way radios!
  • We are 100% Australian owned and operated, serving the customers of Australia for over 10 years.
  • Our business is 100% family owned, allowing us to continue supporting our local community and the Australian Economy.
  • We are happy to continue supporting over 500 loyal customers including Australian small, medium and large businesses up to Government Organisations.
  • We share over 50 years of combined experience in the industry, we’ve worked on a broad range of installations, both small, medium and large. This has given us a unique understanding of the needs of multiple sectors and markets – from consumer to commercial, government and international.
  • We only partner with the highest quality two-way radio manufacturers.
  • We aren’t tied into any specific vendor or platform, so you can be sure you’re getting the very best product and objective advice. You will always have a variety of brands and options for your requirements!
  • We pride ourselves on offering only compliant and approved products and do not support any illegal or non-compliant products. When you talk to our team you can ensure you are getting the right advice to operate within the ACMA Regulatory guidelines.
  • With our extensive industrial and commercial knowledge, we’re always up to date with the latest in two-way technologies. Whether you need a custom solution tailored to your requirements, information or guidance about products, help migrating from analogue to digital or a fully managed service, we’ve got you covered.
  • We are registered with the ARCIA (Australian Radio Communications Industry Association) along with the ITS2573 NSW Government Telco Authority.
  • We offer trade-up or trade-in options for any Two Way Radios. Ask us how!
  • Not happy with your purchase, contact us now to see your options, whether you want to trade-in or return.
  • Need servicing or after sales support, contact us whenever to get support when you need it!
  • We freight our products with TNT Express and Australia Post Express to ensure your equipment arrives on time and securely!
  • Are you unhappy with your current supplier? Contact us for a no obligation quote, we will always give you the best recommendations for your requirements. And if you aren’t happy, we are always available to work with you for the best deal and solution we can offer.
  • Got a question we haven’t answered? Talk to us on our chat, or give us a call on 0439 439 611!